Jigsaw puzzle

Turn a photo into a laser-cut jigsaw. The photo is prepared for your material like One Click does it, and the cut path is a single red hairline where every edge is cut exactly once.

Photo

Choose a photo…

Material

Puzzle size

mmmm

Pieces

pieces→ 4 × 6 = 24

Pieces about 40 × 40 mm

Tab size

Jitter

Seed

Corner radius

Cut the outer borderTurn off if the board is already cut to size, or you frame it another way.

Laser / DPI

DPI

Download

Red 0.01 mm hairline = cut (its own LightBurn layer). Engrave first, then cut, without moving the board.

Preview

240 × 160 mm · seed 1234

Pieces: 244 × 6
Cut length: 3.01 m
Cut time: ≈ 6 min

Cut speedmm/sPasses

A rough guide: cutting time only, at the speed and passes you set (plus a moment per line start). Engraving time is extra. Test the cut on a scrap of the same material first.